Shop Floor with Radiant Heat Lines – Before & After Polyurethane Concrete Lifting & Levelling in St. Adolphe, MB

Side-by-side before and after of shop floor with radiant heat lines after polyurethane foam lifting in St. Adolphe, MB—showing correction of settlement and voids.

Before:

A heated shop floor in St. Adolphe suffered up to 3.5 inches of settlement due to clay subgrade shrinkage. Inspection revealed the slab hovered over a 2–3 inch void and was floating within its post frame supports. After professional mapping of the radiant heat lines, our crew raised and stabilized the slab via precision polyurethane foam injection, restoring grade while protecting the heating system.

Shop Floor With Steel Reinforcement And Radiant Heat Lines Showing 3.5 Inch Corner Settlement And Visible Slab Void Before Polyurethane Foam Injection In St. Adolphe, Mb.

Before

Shop Floor With Radiant Heat Lines Fully Raised And Levelled After Polyurethane Foam Injection—Void Filled And Restored Slab In St. Adolphe, Mb.

After

After:

  • Floor raised by up as much as 3.5 inches after mapping of radiant heat lines
  • Substantial voids filled and slab full support restored
  • Safe, immediate usability post-repair
  • Radiant heat lines protected with pre-scanning and careful drilling/injection

Related Articles

Lifting a Radiant Heated Concrete Floor: In the Shop

Lifting a Radiant Heated Concrete Floor: Shop Floor Edition. Before: The west side of this shop floor with in-floor heat pipes had water draining towards the south west wall. This was causing major issues for this farmer because they were using this area for heavy...

Tilting or Leaning Grain Bin Floor

Say Goodbye to Tilting Grain Bin Floors: Slab-Jack Kings to the Rescue! Are you a farmer struggling with a tilting or leaning grain bin floor, fertilizer bin/tank, or hopper bin? Look no further! Slab-Jack Kings is here to level your grain bin floor at a tiny fraction...

Related Before & Afters